RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée
RopeWizer<sup>MD</sup> - Lʼépissure simplifiée

RopeWizerMD - Lʼépissure simplifiée

PCA-1360

Prix régulier$24.99 CAD
/
Frais d'expédition calculés lors du passage à la caisse.

Travaillez plus sécuritairement et prolongez la vie de votre corde en utilisant le RopeWizer MD 

Les nœuds standards réduisent la capacité de la corde de 30 à 50%. La seule façon d’en conserver près de 100% était d’avoir une épissure faite par un professionnel. Mais plus maintenant ! Le RopeWizerMD est facile à attacher au bout de votre corde et vous donne tous les avantages d’une épissure conventionnelle, à moindre coût ! 

La force de rupture minimale est (MBS) : 25 kN (5620 lbs / 2,549 kg)

Voyez cette vidéo pour en apprendre davantge et voir comment faire le nœud spécial!

**Le RopeWizerMD doit être utilisé avec un facteur de sécurité minimal de 2.**

Lien pour télécharger le manuel

Customer Reviews

Based on 8 reviews
100%
(8)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mark Lewis
Ingenious & Super Handy

I used to keep a bowline loop tied onto one end of my ropes for my PCW-3000 and PCW-4000. I was intrigued by the videos about RopeWizer, so I ordered one for each rope. Very ingenious on three counts: the carabiner is not pulling on the rope directly (eliminates any possible friction; it takes less space than my former bowline loop, and it is a stronger setup (more wraps, no hard bends in the rope) so I get more pulling capacity out of the ropes. I am VERY glad I got these

R
Russell Wilkins
great new tool

Very ingenous device, works very well.

P
Pierre Larose
Very good

Easy to use and helpfull

P
Peter Jaworski
Jury's Still Out

I didn't notice any improvement in pulling power with the RopeWizer versus the hook and bowline knot. If anything it seemed like it put more stress on the rope during use. But no two pulls are exactly the same so it's hard to say if it was better or worse. I'm open to suggestions since I may be doing something wrong.

Good day Mr. Jaworski,

Thank you for taking the time to share your comments. Just to clarify the expectations towards the RopeWizer, I have to say that the accessory is not meant to add power; it improves the rope's capacity during the pull, preserving more of the rope's capacity than a bowline knot would. You will therefore feel no difference during the pulling operation. It is only at the rope's breaking point that the RopeWizer will do what it does. I hope this will be helpful and please don't hesitate to call our team if you have any questions!

P
P.J.
Can't Wait To Try It

The Ropewizer seems like a nice addition to the product line. I just purchased it and can't wait to try it out and compare its performance with the original bowline knot.